Dialing Data Calls Manually - Black Box MC115A User Manual

MOBILE LINC-UP
Or, to make a connection using a fax machine,
press its Start button.
4. Perform the data or fax transfer. When you
finish, return the handset to the cradle.
5. To hang up a modem or fax/modem, use your
software's call-termination feature, or type ATH0
and press Enter from direct connect mode.
Or, to hang up the fax machine, press its Stop
button.
The telephone handset is electronically disconnected
when the modem goes off-hook. You must hang up your
modem to restore use of your telephone handset.
Some fax software takes a few moments to
prepare a document before dialing. This delay
may cause a dial-tone timeout on many
telephones.
To avoid the dial-tone timeout, either convert the
document to fax format before your prepare to
send it, or do not lift the handset from the
telephone cradle until the software indicates that it
is ready to dial.

5.2 Dialing Data Calls Manually

If the digital telephone connected to your Mobile
Linc-Up does not support autodialing, use this
procedure to dial data calls manually.
28