Table of Contents
Advertisement
2 Preparing the camera for use
Rear view
• It is normal for the camera to become warm during operation, because metal camera
casing can conduct heat.
• The LCD display on this camera is manufactured with sophisticated technology, and
more than 99.99% of the pixels on the LCD display meet standard specifications. Yet,
it is possible that less than 0.01% of the pixels on the LCD display may have some light
spots or show unusual colors. This is normal and does not indicate display
malfunction, nor will this affect the pictures you take with the camera.
Preparing the camera for use
Use only the specified battery for the camera, and always turn off the camera before
inserting or removing the battery.
A
B
1. LCD display
2. Camera mode: T (Tele)
PMP mode: Volume up
3. Strap eyelet
4. Camera mode: W (Wide)
out or thumbnail view (playback)
PMP mode: Volume down
5. Camera mode: Play button
PMP mode: Locks/Unlocks all buttons
on the rear of the camera
6. Camera mode: Multifunctional buttons
(including a 4-way control and an
button)
PMP mode: playback controls
7. On-screen instructions (when selecting
a scene mode) or delete photos
(playback mode)
8. MENU button
previous menu
To install the battery:
1. Open the battery cover (A).
2. Insert the battery in the correct direction by matching
the + - label on the battery cover (B).
3. Push the battery all the way down, until the battery
lock lever clicks into place (C).
4. Close the battery cover (D).
- Zoom-in
- Zoom-
or return to the
Advertisement
Table of Contents
