Rotating An Image; Slideshow; Z-Lighting; Trimming - BenQ DC X800 User Manual

Rotating an image

Changes the orientation of an image.
To rotate an image:
1. Press > or
2. Press .
3. Press or
4. Press to confirm the change and save the image file.
You can also press

Slideshow

Sets the time interval for presenting a series of captured image and video files (first frame
only).
To play a slideshow:
1. Press >
2. Press or
3. The slideshow will automatically play. If you want to pause it at any time, press
again to resume playback. To stop the slideshow, press

Z-Lighting

Enhances the brightness and contrast in the darker areas of
a picture to improve overall exposure quality.
To apply Z-Lighting to an image:
1. Press > or
apply Z-Lighting.
2. Press >
3. Press , or to adjust the Z-Lighting value.
4. Press to confirm the change and how to save the image file.

Trimming

Crops part of an image file, reduces the image size, and overwrites the image file or saves it
as another new file.
To trim an image:
1. Press > or
2. Press >
3. Press or
4. Press , ,
5. Press to confirm the change and how to save the image file.
If an image was rotated before, it will revert to its original orientation before you can trim it.
Playback mode (for images and videos captured by the camera) 21
to move to the image you want to rotate.
to change the image to a different orientation.
> > Rotate >
> > Slideshow >
to select a time interval, and then press
to move to the image you want to
> Z-Lighting >
to move to the image you want to trim.
> Trim > or
to select the target image size to which you want to reduce.
, or to locate the area to trim.
or to rotate an image.
or .
or .
.
.
. Press
.