Table of Contents
Advertisement
2 Preparing the camera for use
Rear view
• It is normal for the camera to become warm during operation, because metal camera
casing can conduct heat.
• The LCD display on this camera is manufactured with sophisticated technology, and
more than 99.99% of the pixels on the LCD display meet standard specifications. Yet,
it is possible that less than 0.01% of the pixels on the LCD display may have some light
spots or show unusual colors. This is normal and does not indicate display
malfunction, nor will this affect the pictures you take with the camera.
Preparing the camera for use
Use only the specified battery for the camera, and always turn off the camera before
inserting or removing the battery.
A
B
1. LCD display
2. W (Wide)
3. T (Tele)
4. Strap eyelet
5. Play button
6. Capture mode (toggling between
7. Multifunctional buttons (including
8. On-screen instructions (when
9. MENU button
10. Speaker
To install the battery:
1. Open the battery/SD card cover (A).
2. Insert the battery in the correct direction (B).
3. Push the battery all the way down, until the battery
lock lever clicks into place (C).
4. Close the battery/SD card cover (D).
: Zoom-out or
thumbnail view (playback)
: Zoom-in
still image capturing and movie
recording)
a 4-way control and an
button)
selecting a scene mode) or
delete photos (playback mode)
the previous menu
or return to
Advertisement
Table of Contents
