Date Stamp; Setting Sharpness, Saturation And Contrast; Movie Record Mode Settings - BenQ DC X800 User Manual

Date Stamp

Imprints the date when a picture was taken on the picture itself.
To set the date stamp:
1. Press >
2. Press or , and then select
3. Press or

Setting sharpness, saturation and contrast

Adjusts how colors appear in the pictures by setting sharpness, saturation, and contrast.
To set sharpness, saturation, or contrast:
1. Press >
2. Press or , and then select High, Normal, or Low.
3. Press or

Movie Record mode settings

Icon
Video Format: VGA (640 x 480),
16: 9 (640 x 360), QVGA (320 x
240), or CIF (160 x 128)
Frame Rate: 30/15 fps (frames
per second)
To select a Movie Record option:
1. Press and make sure you can see the icon
2. Press >
3. Press or
4. Press or
To activate Timer Record:
1. Once you set the time and the duration for Timer Record, press
the Movie Record mode.
2. Press . You can see
3. Press the shutter halfway to set automatic focus.
4. Press the shutter down fully. The text (Timer Recording) shows again.
5. shows to indicate that you have activated Timer Record. Make sure the battery power is
adequate and do not turn off the camera. So, you can keep Timer Record activated until it
completes recording the video based on the Timer Record settings you made.
> Date Stamp.
> .
, and then select Sharpness, Saturation or Contrast.
> .
Description
, and then select an option.
to select a setting.
> .
and the text (Timer Recording) on the screen.
or .
Icon
Stabilizer: It is similar to S.S.F.,
but it can be only used in the
Movie Record mode (maximum
ISO value = 4000).
Timer Record Setup: Records
videos at the time and the
duration you set. After setup,
follow the procedure below to
activate Timer Record.
on the screen.
Capture mode 17
Description
> to return to