Date Stamp; Instant Review; Smart Scene; Blink Detector - BenQ E1260 Series User Manual

20 Capture mode

Date Stamp

Imprints the date when a picture was taken on the picture itself.
To set the date stamp:
1. Press >
2. Press or
3. Press >

Instant Review

This feature displays the still image that just recorded for 1 second.
To set the Instant Review:
1. Press >
2. Press or
3. Press >
During instant review, half press the shutter to return to the capture mode.

Smart Scene

Automatically selects the best shooting mode from Portrait
, Backlight
Snow , Text
environment and while the camera is held still).
1. Press >
2. Press the shutter halfway to set automatic focus. The selected shooting mode is displayed
in the top left corner of the screen.
3. Press the shutter to capture an image.

Blink Detector

Automatically detects blinking when you capture an image.
1. Press >
2. Press the shutter to capture an image. If blinking is detected, a warning message appears
on the screen.
3. Press /

Love Portrait

Takes a self portrait of at least two faces.
1. Press >
2. Once faces are detected, the camera will automatically take a picture after a two-second
countdown.
> Date Stamp.
, and then select Date, Date & Time, or
.
> Instant Review.
, and then select
.
, Backlight Portrait
, Foliage , Macro
> Shooting Mode and select
> Shooting Mode and select
to save or discard the image, and then press
> Shooting Mode and select
or .
, Night Portrait
, and Tripod
.
.
.
.
, Landscape , Sunset
, Night Scene
(used in a low-light
to confirm.
,