Rangemaster Nexus 90 Induction User's Manual & Installation Instructions page 12

Power level
1
2
3
4
5
6
7
8
9
Fig. 2.6
Fig. 2.7
Automatic heat-up time at
100% (min:sec)
0:48
2:24
3:50
5:12
6:48
2:00
2:48
3:36
Table 2.2
When the Automatic Heat-up function is activated, the hob
control display will flash alternately between the [A ] setting
and the chosen power level.
Once the Automatic Heat-up time has ended the hob display
will stop flashing and will show the chosen power level.
The Automatic Heat-up function can be stopped by either
turning the control knob back to the "0" power setting or
turning the control knob to the "9" power setting.
For your guidance Table 2.2 shows the time available at
100% power depending on the power level selected in the
Automatic Heat-up mode.
Child Lock,
IMPORTANT: The child lock can only be activated when all
the cooking zones are switched off.
To prevent the unwanted use by children, the hob can be
locked.
To lock the hob, simultaneously turn the two left-hand
controls counter-clockwise (Fig. 2.6) and hold until the
symbol appears in the centre of the hob control display (Fig.
2.7).
Note: [A ] will flash when locking the hob – this is normal.
Locking the hob will NOT affect the oven; it can still be used.
To unlock the hob, simultaneously turn the two left-hand
controls counter-clockwise and hold until the
disappears from the centre of the hob control display.
6
symbol