Cup Set Ting; Brew Strength Selector; Before Brewing - Black & Decker CM2030B User Manual

USING THE 1-4 CUP SETTING
Simply push the "1-4 Cup" button and an icon will appear on the LCD display
indicating the setting has been activated.
Your coffeemaker will optimize water temperature and speed, to maintain
bold coffee flavor when brewing 1-4 cups of coffee.
SETTING THE BREW STRENGTH SELECTOR
Customize the boldness of your coffee by selecting from three brew strength
settings: regular, strong, and bold.
To find your ideal flavor setting, simply press the STRONG button. Press once
for strong and twice for bold. Press a third time and you'll be back to regular
strength coffee.
When using the Brew Strength Selector, the lower right hand corner of LCD
display will display:
a. No bars = regular (default setting)
b. 1 bar ( ) = strong
c. 2 bars (
BE FO RE B R EWIN G
1. To register your product, go to www.prodprotect.com/applica
2. Carefully unpack your coffeemaker, removing all packaging materials, labels, stickers
and the plastic band around the power plug.
3. Clean all removable parts of your coffeemaker in warm, soapy water. Rinse and dry
these parts prior to placing them back into your coffeemaker.
4. Clean the inside of your coffeemaker by running two full brewing cycles with water
only, no coffee.
a. Make sure your coffeemaker is plugged in.
b. Fill the entire water reservoir with fresh, cool water and place carafe onto the
carafe plate.
c. Press the Power button.
d. Once the cycle is finished, discard water.
e. Turn off appliance, unplug and allow to cool down for 15 minutes before repeating.
) = bold
9