Dyna-Glo DGA550SSN User Manual page 20

OPERATING INSTRUCTIONS
Lighting the Grill with a Match
1. Open the lid.
2. Insert a match in the end of the match holder that is
installed on the inside of the cabinet door.
3. Light the match.
4. Immediately place the lit match through the 20 mm
(0.75 in.) hole on the side of the grill body, nearest
the left burner. Make sure the lit match is close to the
burner ports.
5. Press in the control knob that operates the burner and
rotate counter-clockwise to
burner should light immediately.
6. The other main control can now be turned on the High
position by sequence and will light via crossover port.
7. Adjust burners to desired cooking settings.
NOTE: When lighting the rotisserie burner, the control
knob must be pushed in and turned to the high position,
continuing to depress the rotisserie burner control knob in
the high position. Once the rotisserie burner has ignited,
continue to depress the control knob for an additional 30
seconds. The rotisserie burner should then stay lit.
WARNING
Make sure all burner controls are off, except for the
burner being lit and the burners that have been lit.
Shutdown Instructions
1. Turn control knobs
position.
2. Close manual shutoff valve.
3. Close lid.
Turn off manual shutoff valve when appliance is not
in use.
High position and
clockwise to the O "OFF"
LIGHTING MAIN BURNER
LIGHTING SIDE BURNER
LIGHTING ROTISSERIE BURNER
20