Table of Contents
Advertisement
Primary/Secondary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave device. These four items let you assign
the kind of PIO (Programmed Input/Output) was used by the IDE devices. Choose Auto to let the
system auto detect which PIO mode is best, or select a PIO mode from 0-4.
Primary/Secondary Master/Slave UltraDMA (Auto)
Each IDE channel supports a master device and a slave device. This motherboard supports
UltraDMA technology, which provides faster access to IDE devices.
If you install a device that supports UltraDMA, change the appropriate item on this list to Auto. You
may have to install the UltraDMA driver supplied with this motherboard in order to use an UltraDMA
device.
IDE HDD Block Mode (Enabled)
Enable this field if your IDE hard drive supports block mode. Block mode enables BIOS to
automatically detect the optimal number of block read and writes per sector that the drive can
support and improves the speed of access to IDE devices.
Press <Esc> to return to the Integrated Peripherals page.
VIA OnChip PCI Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
AC97 Audio
MC97 Modem
Onchip VIA LAN Device
Onchip VIA LAN Boot ROM [Disabled]
OnChip USB Controller
USB 2.0 Support
USB Legacy Support
USB Mouse Support
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
AC97 Audio (Auto)
Enables and disables the onboard audio chip. Disable this item if you are going to install a PCI
audio add-in card.
MC97 Modem (Auto)
Enables and disables the onboard modem. Disable this item if you are going to install an external
modem.
OnChip VIA LAN Device (Enabled)
Enables and disables the onboard LAN.
OnChip VIA LAN Boot ROM (Disabled)
Enables and disables the booting from the onboard LAN or a network add-in card with a remote boot
ROM installed.
OnChip USB Controller (All Enabled)
Enable this item if you plan to use the Universal Serial Bus ports on this motherboard.
Phoenix-AwardBIOS CMOS Setup Utility
VIA OnChip PCI Device
[Auto]
[Auto]
Menu Level
[Enabled]
[All Enabled]
[Enabled]
[Enabled]
[Enabled]
F6:Fail-Safe Defaults
F7:Optimized Defaults
Using BIOS
Item Help
37
Advertisement
Table of Contents
