Table of Contents
Advertisement
Before installing an add-on card, check the documentation for the card carefully. If
the card is not Plug and Play, you may have to manually configure the card before
installation.
Follow these instructions to install an add-on card:
1
Remove a blanking plate from the system case corresponding to the slot you
are going to use.
2
Install the edge connector of the add-on card into the expansion slot. Ensure
that the edge connector is correctly seated in the slot.
3
Secure the metal bracket of the card to the system case with a screw.
For some add-on cards, for example graphics adapters and network adapt-
ers, you have to install drivers and software before you can begin using the
add-on card.
Installing the Motherboard
21
Advertisement
Table of Contents
