Integrated Peripherals - SCE K8T800Pro-A User Manual

36

Integrated Peripherals

These options display items that define the operation of peripheral components on
the system's input/output ports.
VIA OnChip IDE Device
VIA OnChip PCI Device
SuperIO Device
VIA OnChip IDE Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
OnChip VIA SATA
SATA Mode
IDE DMA transfer access
OnChip IDE Channel0
OnChip IDE Channel1
IDE Prefetch Mode
Primary Master PIO
Primary Slave PIO
Secondary Master PIO
Secondary Slave PIO
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
IDE HDD Block Mode
OnChip VIA SATA (Enabled)
This option allows you to enable or disable the onboard Serial ATA device.
SATA Mode (IDE)
Use this item to select the mode of Serial ATA
IDE DMA transfer access (Enabled)
This item allows you to enable the transfer access of the IDE DMA then burst onto the PCI bus and
nonburstable transactions do not.
On-Chip IDE Channel 0/1 (Enabled)
Use these items to enable or disable the PCI IDE channels that are integrated on the motherboard.
IDE Prefetch Mode (Enabled)
The onboard IDE drive interface supports IDE prefetching, for faster drive access. If you install
a primary and secondary add-in IDE interface, set this field to Disabled if the interface does not
support prefetching.
Phoenix-AwardBIOS CMOS Setup Utility
Integrated Peripherals
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values F6:Fail-Safe Defaults
Phoenix-AwardBIOS CMOS Setup Utility
VIA OnChip IDE Device
[Enabled]
[IDE]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values F6:Fail-Safe Defaults
Using BIOS
Item Help
[Press Enter]
[Press Enter]
Menu Level
[Press Enter]
F7:Optimized Defaults
Item Help
Menu Level
F7:Optimized Defaults