SCE K8T800Pro-A User Manual page 39

AGP Driving Control (Auto)
This item is used to signal driving current on AGP cards to auto or manual. Some AGP cards need
stronger than normal driving current in order to operate. We recommend that you set this item to
the default.
• AGP Driving Value: When AGP Driving Control is to set Manual, use this item
to set the AGP current driving value.
AGP Fast Write (Disabled)
This item lets you enable or disable the caching of display data for the video memory of the
processor. Enabling this item can greatly improve the display speed. Disable this item if your
graphics display card does not support this feature.
AGP Master 1 WS Write (Disabled)
This implements a single delay when writing to the AGP Bus. By default, two-wait states are used
by the system, providing greater stability.
AGP Master 1 WS Read (Disabled)
This implements a single delay when reading to the AGP Bus. By default, two-wait states are used
by the system, allowing for greater stability
AGP 3.0 Calibration cycle (Disabled)
This item is used to implement dynamic compensation to recalibrate the AGP bus over time for
AGP 3.0 compatible chipset.
Press <Esc> to return to the Advanced Chipset Features page.
Using BIOS
33