SCE K8T800Pro-A User Manual page 40

34
DRAM Clock/Drive Control
Scroll to this item and press <Enter> to view the following screen:
Current CPU Frequency/Current DRAM Frequency
These two items show the CPU and DRAM frequency.
Max Memclock (Mhz)(Auto)
When DDR Timing Setting by is set to Manual, use this item to set the DRAM frequency.
1T/2T Memory Timing (Auto)
1T/2T Memory Timing (Auto)
Users please note that this item appears only if CPU after CG version is installed. CPU before CG
version will support 1T Memory Timing only. This item enables you to specify the waiting time for
the CPU to issue the next command after issuing the command to the DDR memory. We
recommend that you leave this item at the default value.
RAS# to CAS# delay (Trcd) (Auto)
This item specifies the RAS# to CAS# delay to Rd/Wr command to the same bank.
Min RAS# active time (Tras) (Auto)
This item specifies the minutes RAS# active time.
Row Precharge Time (Trp) (Auto)
This item specifies the Row precharge to active or auto-refresh of the same bank.
CAS# latency (Tcl) (Auto)
This item determines the operation of SDRAM memory CAS (column address strobe). It is
recommended that you leave this item at the default value. The 2T setting requires faster
memory that specifically supports this mode.
Press <Esc> to return to the Advanced Chipset Features page.
(Press Enter)
Phoenix-AwardBIOS CMOS Setup Utility
DRAM Clock/Drive Control
Current CPU Frequency
Current DRAM Frequency
Max Memclock (Mhz) [Auto]
1T/2T Memory Timing [Auto]
CAS# latency (Tcl) [Auto]
RAS# to CAS# delay(Trcd) [Auto]
Min RAS# active time [Auto]
Row Precharge Time [Auto]
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values F6:Fail-Safe Defaults
Using BIOS
Item Help
Menu Level
F7:Optimized Defaults