Portable Spot Cleaning Mode; Preparing The Machine - Bissell 24A4 SERIES User Manual

O
perations

Portable spot cleaning mode

Preparing the machine

1. step on the portable spot cleaning pedal
to release the portable spot cleaner.
2. Release flex hose by twisting the hose
secure latch clockwise. unwrap flex
hose completely.
3. attach the desired tool to the hose grip
until it snaps together. make certain the
tool is securely attached.
4. twist the Quick Release cord wrap clock-
wise to unwrap the power cord completely
and plug into grounded outlet.
Filling tank
1. follow the instructions for filling the tank
in the upright cleaning mode section on
page 8.
Cleaning with Tools:
ImPORTANT! If using to clean uphol-
stery, check upholstery tags. Check
manufacturer' s tag before cleaning.
"W" or "WS" on the tag means you
can use your Lift off Deep Cleaner if
the tag is coded with an "X" or an
"S"(with a diagonal stripe through it),
or says "Dry Clean Only", do not pro-
ceed with any deep cleaning machine.
Do not use on velvet or silk. If manu-
facturer' s tag is missing or not coded,
check with your furniture dealer.")
NOTE: If your deep cleaner came
with a Deep Reach Tool, do not follow
cleaning instructions below. Instead,
follow instructions in next section.
1. hold the tool approximately 1" above
the soiled surface. Press the spray
trigger to apply the cleaning solution
to the soiled area.
NOTE: Hold end of hose below the
tank water level to help prime the
portable spot cleaner.
2. using the brush on the tool, gently scrub
the area to be cleaned.
3. apply downward pressure on the tool and
pull it toward you. the suction will remove
the dirt and cleaning solution. continue until
no more dirt can be removed.
w w w . b i s s e l l . c o m
Manufacturer's tag
Check for colorfastness in an
inconspicuous place. If possible,
check upholstery stuffing. Colored
stuffing may bleed through fabric.
8 0 0 . 2 3 7 . 7 6 9 1
11