Basic Wireless Settings - TRENDnet TEW-721BRM User Manual

TRENDnet User's Guide
PBC (Software/Virtual Push Button)
Setup > Wireless Settings > WPS Setup
In addition to the hardware push button located physically on your router, the router
management page also has push button which is a software or virtual push button you
can click to activate WPS on your router.
1. Log into your router management page (see "Access your router management page"
on page 22).
2. Click on Setup and click Wireless Settings, then click on the WPS Setup button at the
bottom of the page.
3. To add a wireless device to your network, simply the push the WPS button on the
wireless device (consult wireless device's User's Guide for length of time), you are
connecting, then in your router management page, make sure the Config Method is
set to Push Button (default setting) and click on the Trigger button at the bottom of
the page.
4. The WPS Status area will display status messages about the WPS process.
5. The WPS Status area will display "Configured" message to indicate that the wireless
client device successfully connected using WPS.
PIN (Personal Identification Number)
Setup > Wireless Settings > WPS Setup
If your wireless device has WPS PIN (typically an 8-digit code printed on the wireless
device product label or located in the wireless device wireless software utility), you can
use this method.
1. Log into your router management page (see "Access your router management page"
on page 22).
2. Click on Setup and click Wireless Settings, then click on the WPS Setup button at the
bottom of the page.
3. Next to Config Status, click Release. The status will change to Unconfigured.
© Copyright 2014 TRENDnet. All Rights Reserved.
4. Click the Config Method drop-down list and select PIN Code. Click Apply.
5. In the empty field, enter the 8-digit WPS PIN of the wireless client device you are
connecting and click Trigger.
Note: You may need to initiate the WPS PIN on your wireless device first when using
this method. Refer to your wireless device documentation for details on the
operation of WPS.
6. The WPS Status area will display "Configured" message to indicate that the wireless
client device successfully connected using WPS.

Basic wireless settings

Setup > Wireless Settings
This section outlines available management options under the Wireless Settings tab.
1. Log into your router management page (see "Access your router management page"
on page 22).
2. Click on Setup, and click on Wireless Settings.
3. To save changes to this section, click Apply when finished.
TEW-721BRM
14