Threading The Lower Looper - Janome MyLock 213 Instruction Manual

Janome ML213 Instruction Manual
!1
!0
o
y
u
i
q
(A)
1
2
e
3
www.aaasewing.com
16
q
w
e
t
r
3
(B)
w

• Threading the Lower Looper

Open the looper cover and side cover.
Place the spool of thread on the right side spool pin.
* The points to thread for lower looper are marked
in green.
* A convenient threading chart is placed on the
machine body inside the looper cover.
2 1
1. Draw the thread through the right side thread
guide from back to front: A
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown: B
q
Thread guide
2. Pass the thread through the holes on the right side
of the thread guide plate as illustrated.
w
Thread guide plate
3. Pass the thread through the right side of the
looper thread guide, by sliding the thread from
left to right.
e
Looper thread guide
Janome My Lock
ML213 Owners Manual/ User Guide