Janome MyLock 213 Instruction Manual page 23

Janome ML213 Instruction Manual
4, 5
y
6, 7, 8
www.aaasewing.com
22
t
r
u
i
4, 5. Turn the handwheel toward you to bring the
needle bar to its highest position, then pass the
thread through the needle thread guide and
the thread take-up lever cover.
r
Needle thread guide
t
Thread take-up lever cover
6. Pass the thread through the needle thread guide
sliding the thread from left to right.
7. Pass it through the needle bar thread guide from
left to right.
8. Thread the needle from front to back and
pull the thread about 10 cm (4˝) from the eye of
the needle to the back.
y
Needle thread guide
u
Needle bar thread guide
i
Needle
– Gently pull all three thread ends towards the
back of the machine.
– Run threads under the presser foot and lower
the presser foot.
– Close side cover and looper cover.
– Turn handwheel toward you to chain off three
or four stitches.
The sewing preparation is now complete.
Janome My Lock
ML213 Owners Manual/ User Guide