Threading The Upper Looper - Janome MyLock 213 Instruction Manual

Janome ML213 Instruction Manual
r
t
o
i
y
u
q
(A)
1
2
e
3
www.aaasewing.com
q
w
e
3 2
(B)
w

• Threading the Upper Looper

Place a spool of thread on the spool pin second
from the right.
* The points to thread for upper looper are marked
in red.
* A convenient threading chart is placed on the
machine body inside the looper cover.
1
1. Draw the thread through the thread guide second
from the right from back to front: A
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown: B
q
Thread guide
2. Pass the thread through the holes in the second
row from the right of thread guide plate as
illustrated.
w
Thread guide plate
3. Pass the thread through the left side of looper
thread guide sliding the thread from right to left.
e
Looper thread guide
Janome My Lock
ML213 Owners Manual/ User Guide
19