Threading The Lower Looper - Janome Air Thread 2000D Professional Instruction Manual

z
q
(A)
x
w
c
t
v
b
z
x
c
b
v
(B)
e
r
r
y
u

Threading the Lower Looper

CAUTION
Turn the power switch OFF before threading the
machine.
NOTE:
Raise the presser foot lifter for easier threading.
z Draw the thread through the right side thread guide
from back to front: (A)
q Thread guide
NOTE:
If the thread tends to slip away from the guide while
sewing, pass the thread through both thread guide
holes as shown: (B)
x Slide the thread under the top cover thread guide as
illustrated.
w Top cover thread guide
c Pull the thread along the slit.
Using both hands, insert the thread between the
tension disks of the lower looper thread tension dial.
e Thread
r Tension disk
t Lower looper thread tension dial
v Set the lower looper pre-tension setting slider to STD.
y Lower looper pre-tension setting slider
b Draw the thread along the slit and pass it through the
right slit of the looper thread guide.
u Right slit of looper thread guide
19