Configuring The Touchscreen - Panasonic CF-72 Series Reference Manual

Touchscreen
Double click settings
Set the width and height
of the double click.
Advanced configuration
Set the advanced settings.
<Only for models with touchscreen>

Configuring the Touchscreen

When needed, the touchscreen can be configured using the following steps.
1
Windows 2000
Select from the taskbar and then select [TouchScreen] or
select [TouchScreen] in [Control Panel] - [Mouse]
Windows XP
Select from the taskbar and then select [TouchScreen] or
select [TouchScreen] in [Control Panel] - [Printers and Other
Hardware] - [Mouse]
The following screen will appear.
(This is the Windows 2000 screen for models
with touchscreen.)
NOTE
For more information, click
2
Make necessary changes
3
Select [OK]
NOTE
The double-click speed of the touchscreen can be changed in [Tap and Buttons]*.
* Windows 2000 : In [Control Panel] - [Mouse]
Windows XP : In [Control Panel] - [Printers and Other Hardware] - [Mouse]
Test
Test for the "Double click settings".
Calibration & Test
Define the calibration setup. Use
this procedure when the cursor
does not appear properly. (Nec-
essary for changes in the align-
ment of the touchscreen with vi-
sual images or an adjustment of
the display resolution.)
Touch the "+" mark on the calibra-
tion screen for about one second.
After the calibration procedure is
executed (e.g., after the nine "+"
marks are touched), the procedure
ends when Enter is pressed.
at the upper right corner.
12
(To next page)