Panasonic CF-72 Series Reference Manual page 8

Touch Pad
(Advanced)
When you want to use an external mouse through the external
keyboard/mouse port
When an external mouse or trackball with additional functions (e.g., wheel function)
is connected, a part or all of the additional functions may fail to operate. To use these
additional functions, perform the operation below.
If you are using a USB mouse, the following operation is unnecessary.
Windows 2000
1 In [Control Panel] - [Add/Remove Programs], select [touchpad] (models without
touchscreen) or [touchpad/touchscreen] (models with touchscreen) and then se-
lect [Change/Remove] to delete it, then select [Yes] to confirm the deletion.
• The display will ask you to restart Windows. Select [No].
2 Power off your computer (
external mouse or trackball device to the computer.
3 Turn the power on and run the Setup Utility (
[Touch Pad] and [Touchscreen] (only for models with touchscreen) to [Disable]
and close the Setup Utility.
4 Log on to Windows.
5 The display will ask you to restart Windows, select [Yes].
6 Following the operation manual of the connected external mouse, install the nec-
essary driver.
Windows XP
1 In [Control Panel] - [Add or Remove Programs], select [touchpad] (models with-
out touchscreen) or [touchpad/touchscreen] (models with touchscreen) and then
select [Change/Remove] to delete it, then select [Yes] to confirm the deletion.
2 In [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] -
[Device Manager] - [Mice and other pointing devices], select [touchpad] (models
without touchscreen) or [touchpad/touchscreen] (models with touchscreen), then
select [Roll Back Driver] at [Driver].
At the confirmation message, select [Yes].
• The display will ask you to restart Windows. Select [No].
3 Power off your computer (
external mouse or trackball device to the computer.
4 Turn the power on and run the Setup Utility (
[Touch Pad] and [Touchscreen] (only for models with touchscreen) to [Disable]
and close the Setup Utility.
5 Select User (only necessary when multiple accounts are created).
6 The display will ask you to restart Windows, select [Yes].
7 Following the operation manual of the connected external mouse, install the nec-
essary driver.
"Starting Up/Shutting Down") and connect the
page 54). In [Main] menu, set
"Starting Up/Shutting Down") and connect the
page 54). In [Main] menu, set
8
(To next page)