Hard Disk Drive - Panasonic CF-72 Series Reference Manual

Hard Disk Drive

To Change your Hard Disk Drive, Contact Panasonic Technical Support
Tab
(A)
CAUTION
To change your hard disk drive, contact Panasonic Technical Support.
Be sure to back up all important data before the change.
You can erase the data before changing the hard disk drive.
( "Hard Disk Data Erase Utility")
If [Hard Disk Lock] is set to [Enable] in the Setup Utility, change this to [Disable]
before the change.
Be careful when replacing the hard disk drive. The hard disk drive is extremely
sensitive to shock. In addition, static electricity could later affect some internal
components.
Inserting/Removing the Hard Disk Drive
1
Power off your computer
Do not shut down using the standby or hibernation function.
Disconnect the AC adaptor and remove the second battery pack if one
is inserted.
2
Remove the main battery pack
3
Removing the hard disk drive
While pulling the tab in the direction indicated by the arrow (A),
lift the hard disk drive.
Remove the hard disk drive.
Installing the hard disk drive
Insert the hard disk drive as shown in the figure.
Put the hard disk drive in place.
Connect the hard disk drive (via the hard disk drive connector) to
the computer.
4
Insert the battery pack and then put the battery pack
cover back into place
( "Starting Up/Shutting Down")
( page 30)
( page 30)
53