Connecting To The Internet; Protecting The System From Unauthorized Access; Setting Up Port Forwarding; Choosing An Appropriate Client - Bosch DIVAR IP 3000 DIP-3040-00N Installation Manual

16 en | Connecting to the internet
5 Connecting to the internet
This section describes the steps that are required to access the DIVAR IP system from the
internet.
5.1 Protecting the system from unauthorized access
In order to protect the system from unauthorized access, we recommend that you follow
strong password rules before connecting the system to the internet. The stronger your
password, the more protected your system will be from unauthorized persons and malware.
5.2 Setting up port forwarding
In order to access a DIVAR IP system from the internet through a NAT/PAT capable router, port
forwarding must be configured on the DIVAR IP system and on the router.
To set up port forwarding:
1.
2.
3.
4.
5.
6.
7.
8.
5.3 Choosing an appropriate client
There are two supported clients that allow remote connections to a DIVAR IP system through
the internet.
5.3.1 Remote connection with Operator Client
To make a remote connection with Bosch VMS Operator Client
1.
2.
3.
4.
5.
6.
7.
5.3.2 Remote connection with Video Security App
To make a remote connection with Video Security App:
1.
2.
2014.11 | V5 | DOC
Make sure the system is fully configured with all devices.
On the Bosch VMS default screen, double-click the Bosch VMS Wizard icon. The
Welcome page is displayed.
Follow the wizard until the Basic page is displayed.
Under Port Mapping, select the Enable Port Mapping check box.
Specify the public IP adress or the DNS name of your internet connection.
Follow the wizard until the Finish page is displayed, then click Details.
Note the port rules displayed in the Port Mapping Table or export the table to a USB
drive.
Enter these port rules in the port forwarding settings of your internet router.
The DIVAR IP system is now accessible from the Internet.
Download the resource folder of the Bosch VMS installer using the following network
share:
\\<IP address of DIVAR IP>\sources
Copy the Setup directory to the remote workstation that will be used for remote viewing.
In the Setup directory, right-click setup.exe, then click Run as administrator and accept
the security message.
In the Welcome dialog box clear all check boxes except Operator Client.
Follow the installation process.
After finishing the installer successfully, start Operator Client using the desktop shortcut.
Enter the following, then click OK.
User name: admin
Password: enter user password
Connection: enter public IP address or dynDNS name
In Apple's App Store search for Bosch Video Security.
Install the Video Security app on your iOS device.
Installation Manual
DIVAR IP 3000
Bosch Sicherheitssystem GmbH