Table of Contents
Advertisement
DIVAR IP 3000
4.
5.
6.
7.
8.
9.
10. Change the password.
11. On the Bosch VMS default screen, double-click the Bosch VMS Wizard icon
12. Configure the system using the Configuration Wizard.
Notice!
To perform administrative tasks, the BVRAdmin account can be entered when Bosch VMS
default screen is displayed. To do so, press CTRL+ALT+DEL, then hold down SHIFT while
clicking the Switch User option and keep SHIFT pressed for about five seconds.
Notice!
We strongly recommend not changing any operating system settings. Changing operating
system settings can result in malfunctioning of the system.
See also:
–
–
–
4.4
Using Bosch VMS Config Wizard
Intended use for Config Wizard is the quick and easy configuration of a smaller system. Config
Wizard helps you to achieve a configured system including VRM, iSCSI system, cameras,
recording profiles and user groups.
User groups and their permissions are configured automatically. You can add or remove users
and set passwords.
Config Wizard can access Management Server only on the local computer.
You can save an activated configuration for backup purposes and import this configuration
later. You can change this imported configuration after import.
Config Wizard adds the local VRM automatically.
Bosch Sicherheitssystem GmbH
In the Country or region, Time and currency and Keyboard layout lists, click the
appropriate item, then click Next.
The Microsoft Software License Terms and the EULA (End User License Agreement) are
displayed.
Accept the license terms, then click Start. Windows restarts.
After restart is finished, different Bosch VMS versions are displayed on the screen.
Double-click the Bosch VMS version you want to install.
Note. We recommend that you install the latest version.
The installation can take several minutes. Do not turn off the computer. If necessary,
restart the system.
After restart is finished, press CTR+ALT+DELETE. The Windows logon page is displayed.
Enter the default password WSS4Bosch.
After entering the password, a message is displayed that you must change the password
before logging on the first time. To confirm, click OK.
A series of scripts perform important setup tasks. This can take several minutes. Do not
turn off the computer.
The Bosch VMS default screen is displayed.
Note: In case of password loss a system recovery must be performed as described in the
installation manual. The configuration must be done from scratch or must be imported.
the Configuration Wizard.
The Welcome page is displayed.
Using Bosch VMS Config Wizard, page 13
Adding additional licenses, page 14
Recovering the unit, page 18
Installation Manual
System setup - first steps | en
to start
2014.11 | V5 | DOC
13
Hide quick links:
Advertisement
Table of Contents
