Biostar BIB75-M2T User Manual page 47

Max TOLUD
This item sets maximum value of TOLUD. Dynamic assignment would adjust
TOLUD automatically based on largest MMIO length of installed graphic
controller.
Options: Dynamic (Default) / 1 GB / 1.25 GB / 1.5 GB / 1.75 GB / 2 GB /
2.25 GB / 2.5 GB / 2.75 GB / 3 GB / 3.25 GB
NMode Support
NMode support Option
Options: Auto (Default) / 1N Mode / 2N Mode
Memory Scrambler
This item enables or disables memory scrambler support.
Options: Enabled (Default) / Disabled
MRC Fast Boot
This item enables or disables MRC Fast Boot.
Options: Enabled (Default) / Disabled
Force Cold Reset
Force cold reset or choose MRC cold reset mode, when cold boot is required
during MRC execution. Note: if ME 5.0MB is present, Force cold reset is
required!
Options: Enabled (Default) / Disabled
DIMM Exit Mode
DIMM Exit Mode Control
Options: Fast Exit (Default) / Auto / Slow Exit
Power Down Mode
Power Down Mode Control
Options: PPD (Default) / No Power Down / APD / APD-PPD
Scrambler Seed Generation Off
This item sets control memory scrambler seed generation.
Enable – do not generation scrambler seed.
Disable – generation scrambler seed always.
Options: Disabled (Default) / Enabled
Memory Remap
This item enables or disables memory remap above 4G.
Options: Enabled (Default) / Disabled
BIB75-M2T
45