Biostar BIB75-M2T User Manual page 12

User's Manual
Step2:
Insert the DIMM vertically and firmly into the slot until the retaining chip snap
back in place and the DIMM is properly seated.
Note:
If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
B. Memory Capacity
DIMM Socket
Location
DDR3_A1
DDR3_A2
DDR3_B1
DDR3_B2
C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status DDR3_A1 DDR3_A2 DDR3_B1 DDR3_B2
Enabled
Enabled
Enabled
(O means memory installed, X means memory not installed.)
Note:
The DRAM bus width of the memory module must be the same(x8 or x16)
10
DDR3 Module
512MB/1GB/2GB/4GB/8GB
512MB/1GB/2GB/4GB/8GB
512MB/1GB/2GB/4GB/8GB
512MB/1GB/2GB/4GB/8GB
O X
X O
O O
Total Memory Size
Max is 32GB.
O X
X O
O O