Switching Hetwccn Digital And Analog Audio; (Input Mode) - Sony STR-DA5300ES Operating Instructions Manual

Switching between
digital and analog audio
(INPUT MODE)
When you connect components to bOlh digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you inlend
to watch.
1
Press the input button.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP.
3
Press INPUT MODE repeatedly
to select the audio input mode.
The selected audio input mode appears on
the TV screen.
Audio input modes
• Aula
Gives priority to digital audio signals when
there are both digital and analog
connections.
If there arc no digital audio signals, analog
audio signals are selected.
• Analog
Specifies the analog audio signals input to
the AUDIO IN (UR) jacks.
Notes
• Some audio input modes may not be set up
depending on the input.
• When either HDMI input. satellite tuner or
DIGITAL MEDIA PORT adapter is selected,
"------" appears on the display. and you cannot
select other modes. Sclect an input mode other than
the HDMI input, satellite tuner and DIGITAL
MEDIA PORT adapter then set the audio input
mode.
• When "2ch Analog Direct" is being used. or the
multi-channel input is selected, audio input is set to
"Analog." You cannot select other modes.
99 G8
•
o
~
III
.,
o
"t:l
III
ii1
-
0 '
:::J
111