Sony STR-DA5300ES Operating Instructions Manual page 112
Hide thumbs
Also See for STR-DA5300ES:
- Operating instructions manual (310 pages) ,
- Service manual (260 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
Tips
o
Even when this receiver is standby mode (press
I/C)
on the remote to turned off this receiver). the
receiver in zone 2 or zonc 3 rcmains turned on. To
turn off all receivers. press
I/C)
and AV
I/C)
on the
RM-AALOOR remote at the same time (SYSTEM
STANDBY).
o
Only signals from components connccted to the
analog input jacks are output through the ZONE 2
OUT/ZONE 3 OUT jacks. No signals are output
from components connccted to only the digital
input jacks.
• Whcn SOURCE is selcctcd. the signals input to thc
MULTI CHANNEL INPUT jacks are not output
from the ZONE 2 OUT or ZONE 3 OUT jacks
evcn when the multi-channel input is selected. Thc
analog audio signals of the currcnt function are
outpul.
• Whcn "Tuncr" is selcctcd; the samc Iypc of radio
station
(FM/AM)
selected in the main zone is SCI in
zone 2 and zone 3. However. you can select the
input othcrthan "Tuner" in zone 2 and zone 3.
o
When the rcceiver in thc main ?Onc is turncd ofr. or
an input source othcr than "Tuner" is selected. you
can select a radio station from AM or FM in zone
• 12V Trigger
Vou can turn the receiver on/off in another
zone, or select various options for usc of the
12V Trigger function. as explained below.
• OFF
Lets you turn off output of 12V triggers even
when the main receiver is turned on.
• ZONE
Lets you turn the output of 12V triggers on
or
off based on whether the selected zone is
turned on or otT.
o
CTRL
Lets you turn the output of 12V triggers on
or off manually using the CIS command of
the IR remote.
• INPUT (for "Main" only)
Lets you turn on the output of 12V triggers
when the preset input is selected.
When you select "Input," the setting display
which sets each input trigger to on/off
appears. Press
+/+
to select the input. then
press
8)
to check the box.
• MAIN (for "Zone 2'" and "Zone
3"
only)
Lets you link operation of trigger in zone 2
or
zone
:1
to the main receiver.
GB
Option menu parameter of
2/zone 3 operations
2. Whcn the reccivcr in the main zonc and zone 2
arc turncd ofT. you can select a radio station from
AM or FM in zone 3.
Whcn two of the receivers in thc main ?One. zone 2
or zone 3 are turned ofT. you can selecl a broadcast
from FM/AM/XM/SIRIUS in one zone in which
the rcceiver is turned on.
RM-AAL008
IR repeater
(nol supplied)
STR-DA5300ES
About the IR REMOTE jack
vou can operate the receiver without pointing
the remote toward the IR repeater of the
receiver if you connect an IR repeater (not
supplied) to the IR REMOTE jack.
Usc an IR repeater when you install the
receiver in a place where signals from the
remote cannot reach.
• RS-232C Control
• ON
The receiver can receive commands from the
RS-232C port.
• OFF
The receiver does not receive commands
from the RS-232C port.
Page 112
Advertisement
Table of Contents
