Sctting Remote Control Codes That Are Not Stored In The Remote - Sony STR-DA5300ES Operating Instructions Manual

Starting macro play
1 Press AMP.
The AMP button lights up, and then turns
off.
2
Press MACRO 1 or MACRO 2 to start
the macro.
The macro starts and execute the
commands in the order you assigned them.
While the commands are being sent, the
RM SET UP button flashes and the AMP
button lights up. When the commands have
been sent, the RM SET UP and AMP
buttons turn oiT.
To erase a programmed macro
1
Press MACRO 1 or MACRO 2 for more
than 1 second while pressing RM SET
UP to clear the stored macro.
The RM SET UP button flashes,
repeatedly.
2
Press RM SET UP.
Settings stored as macro are cleared.
132
GB
Setting remote control
codes that are not stored
in the remote
Even if a remote control eode is not one of the
presets stored in the remote, it is possible for
the remote to learn the code usi ng the learning
function.
Note
When setting up Ihe receivcr
10
learn Ihe remOle
command modes. replace Ihe batteries with new
ones.
Exampte for assigning numeric button I to
VIDEO I of the remote:
1
Press TV while pressing RM
SET UP.
The RM SET UP button lights up.
Tip
When you press RM SET UP. use a Ihin wire.
such as a paper cl ip.
2
Press the input button (VIDEO 1
in the example) for which you
want to use the Learning input
function.
The input button flashes. (The RM SET
UP button remains lit.)