Sony STR-DA5300ES Operating Instructions Manual page 36

Notes on converting video signals
• When video or S vidco signals from a VCR,
etc., arc converted on this recciver and then
output to your TV, depending on thc status of
the video signal output, the image on the TV
screen may appear distorted hori7.0ntally or
no image may be output.
• HDMI video signals cannot he convertcd to
component video signals, S video signal and
video signals.
• The converted video signals are output only
from the MONITOR VIDEO OUT jacks.
They are not output from VIDEO OUT
jacks, S VIDEO OUT jacks or the ZONE
2
VIDEO OUT jack.
• When you playa VCR with an image
improvement circuit, such as TBC, the
images may be distorted or may not be
output. In this case, set the image
improvement circuit function to ofT.
• The resolution of the signals output to the
COMPONENT VIDEO MONITOR OUT
jacks is converted up to I080i. The
resolution of the signals output to the HDMI
OUT jack is converted up to I080p.
• COMPONENT VIDEO MONITOR OUT
jacks have rcstrictions on resolution whcn
thc resolution of video signals protectcd hy
copy tight technology is converted.
Resolution of up to 480p can be output to the
COMPONENT VIDEO MONITOR OUT
jacks. The HDMI OUT jack has no
restriction on resolution.
• Video signals for which the rcsolution has
been converted cannot be output from either
the COMPONENT VIDEO MONITOR
OUT jacks or the HDMI OUT jack. The
video signals are output from thc HDMI
OUT jack when hoth arc connected.
• Set "Resolution" to "AUTO" or "480i/576i"
in the Video settings menu to output the
video signals from the MONITOR VIDEO
OUT, MONITOR S VIDEO OUT,
COMPONENT VIDEO MONITOR OUT
jack when hoth are connected.
36 GB
To display Closed Caption
Set "Resolution" to "DIRECT' in the Video
settings menu when receiving a signal that
supports Closed Captions.
Use the same kind of cords for the input/output
signals.
To connect a recording
component
When recording, connect the recording
component to the VIDEO OUT jacks or
S
VIDEO OUT jacks of the receiver. Connect
cords for input and output signals to the same
type of jack, as VIDEO OUT jacks and S
VIDEO OUT jacks do not have an up-
conversion function.
Note
Signals output from the MONITOR VIDEO OUT
jacks Illay not be recorded properly.