Sony STR-DA5300ES Operating Instructions Manual page 48

8
The measurement starts in five
seconds.
2
Press
+/+
repeatedly to select
"Settings;' then press
8)
or •.
The Settings menu list appears on the TV
screen.
Press
8)
to select "Start."
Press •.
6
7
3
Press
+/+
repeatedly to select
"Auto Calibration," then press
8)
or •.
4
Press
+/+
repeatedly to select
"Quick Setup," then press
8).
5
Press
+/+
repeatedly and
8)
to
un-check the items you do not
want to measure.
• Speaker Distance
• Speaker Level
• Frequency Characteristic
-2·7
1
Make sure that the AMP button
is lit.
If it is not lit, or "GUI MODE" is not
displayed in the display window of the
receiver, follow the steps given in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 41).
a) This receiver c,mects signals hy analog
downmix processing only
1'01'
the ccnter speaker
and sub woorer when the multi-channel input is
selected. Thc correction is invalid
1'01'
other
speakers.
h) The measurement result is not utilized when the
multi-channel input is selected.
c) • Signals with a sampling rrequency of more than
96 kHz are always played back at either
44.1 kHz or 48 kHz.
• The measurement result is nol utilized in the
rollowing cases.
- The multi-channel input is selected.
-"2ch Analog Direct" is being used.
-Dolhy TrueHD signals with a sampling
frequency of more than 96 kH7. are being
received.