Table of Contents
Advertisement
CUTTER
1
Disconnect the
power supply cable.
2
BUTTON IN
LOCKED POSITION
Remove the side cover by
rotating the lock/unlock.
BUTTON IN
UNLOCKED POSITION
3
Lift up the print head using the
opening slot (A) located on the cover
4
ATTENTION:
Do not touch the head heating line with bare hands or
metal objects.
Do not perform any operation inside the printer immedi-
ately after printing because the head and motor tend to
become very hot.
Lift up the autocutter.
User manual
6. MAINTENANCE
A
KPM216HII 55
Advertisement
Table of Contents
