Near Paper End Sensor - OEM KPM216HII User Manual

3.4 Near paper end sensor

The printer includes a near paper end sensor with wiring (see following fi gure). To fi x the sensor use two M3 screws
not supplied.
NPE
sensor board
For the assembly procedure, proceed as follows:
1
Paper roll
Fix the near paper end sensor board to the support using two M3 screws not included.
For the correct functioning of the near paper end sensor, comply with the measures specified
MATERIAL INCLUDED
NPE sensor NPE wiring
B
A
NPE sensor
NPE sensor board
1÷6 mm
User manual
3. INSTALLATION
MATERIAL NOT
INCLUDED
Fixing
screws M3
NPE wiring
Spacers
A+B
Support
KPM216HII 21