Vga/Usb Board - HP EliteBook 745 G2 Maintenance And Service Manual

VGA/USB board

Description
VGA/USB board for use in HP EliteBook 745 models
VGA/USB board for use in HP EliteBook 755 models
Before removing the VGA/USB board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Service door (see
b. Battery (see
c. Fan (see
d. Keyboard (see
e. Base enclosure (see
Remove the VGA/USB board:
Removing the VGA/USB board for HP EliteBook 745 models
1. Disconnect the cable from the VGA/USB board (1).
2. Remove the two Phillips PM2.0×5.0 screws (2) that secure the VGA/USB board to the top cover.
ENWW
Service door on page
Battery on page 49)
Fan on page 74)
Keyboard on page
Internal base enclosure on page
47)
58)
68)
Spare part number
768792-001
773961-001
Component replacement procedures 77