Horizon Fitness Excel 207 User Manual page 7

AS SEM BLY STEP 5
NOTE: Excel 207 SKIP THIS STEP
NOTE: There is NO hardware bag for this step.
A) Snap the front and back HANDLEBAR COVERS together onto the UPPER HANDLE BARS.
Note the position of the snap tabs on the covers before snapping into position.
B) Repeat on other side.
12
HZ EX Series Ellipticals Rev 0.5.indd 12-13
(E xcel 307,Excel 407 ONLY)
UPPER HANDLEBAR
HANDLEBAR
COVERS
Excel 307 & Excel 407 ONL Y
ASS EMBLY STEP 6
GUIDE RAIL
LOWER LINK ARM
A) Open HARDWARE BAG FOR STEP 6.
B) Slide LOWER LINK ARM into bottom end of LOWER HANDLEBAR. Slide BOLT (E) through outside hole in
LOWER HANDLEBAR, through 1 TEFLON WASHER (F), SPACER (G) and another TEFLON WASHER (F). Secure
using NUT (H).
C) Repeat on other side.
HARDWARE BAG FOR STEP 6 CONTENTS :
BOLT (E)
60 mm
Qty:2
TEFLON WASHER(F)
24 mm
Qty:4
LOWER HANDLEBAR
NUT (H) BOLT (E)
SPACER (G)
TEFLON WASHERS (F)
SPACER (6)
44 mm axis
Qty:2
NYLON NUT (H)
INSIDE DIAMETER
8 mm
Qty:2
13
8/10/05 8:17:10 AM