Horizon Fitness Excel 207 User Manual page 5

A SS E MBLY STEP 2
BOLT(A)
SPRING WASHER(B)
FLAT WASHER(C)
MAIN FRAME
A) Open HARDWARE BAG FOR STEP 2.
B) Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
C) Attach the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4 FLAT
WASHERS (C).
HARDWARE BAG FOR STEP 2 CONTENTS :
BOLT(A)
20 mm
Qty:4
SCREW(K)
Excel-307 &Excel-407 ONLY: 10 mm
Qty:2
8
CONSOLE MAST
CONSOLE
MAST
GROMMET
CONSOLE WIRES
SPRING WASHER (B) FLAT WASHER(C)
18 mm 20 mm
Qty:4 Qty:4
CONSOLE
MAST
GROMMET
SCREWS(K)
ACCESSORY TRAY
(Excel-307,Excel-407)
MAIN FRAME
D) Insert the left TOP SIDE COVER, followed by the right TOP SIDE COVER and snap them together.
E) Excel 307 & Excel 407only: Insert ACCESSORY TRAY and secure it using 2 SCREWS (K) as shown.
F) Slide CONSOLE MAST GROMMET down to seal the console mast hole.
TOP SIDE COVERS
(Excel-207)
TOP SIDE COVERS
(Excel-307,Excel-407)
9