Table of Contents
Advertisement
L The unit has a document in memory. See the
other displayed message instructions to print
out the document. For fax memory capacity,
see page 76.
—————————————————————
FAX MEMORY FULL
L The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 9) or
clear the jammed paper (page 71).
L When performing broadcast transmission,
the document being stored exceeded the
memory capacity of the unit. Send the entire
document manually.
—————————————————————
MEMORY FULL
L There is no space to store new items in the
base unit phonebook. Erase unnecessary
items (page 26).
—————————————————————
MESSAGE FULL
L There is no memory available to record voice
messages. Erase unnecessary messages
(page 47).
—————————————————————
MODEM ERROR
L There is something wrong with the unit's
modem. Contact our service personnel.
—————————————————————
NO FAX REPLY
L The other party's fax machine is busy or has
run out of recording paper. Try again.
—————————————————————
PAPER JAMMED
L A recording paper jam occurred. Clear the
jammed paper (page 71).
—————————————————————
PLEASE WAIT
L The unit is checking and initializing the paper
cutter. Wait for a moment while the check is
completed.
—————————————————————
POLLING ERROR
L The other party's fax machine does not
support polling. Check with the other party.
—————————————————————
REDIAL TIME OUT
L The other party's fax machine is busy or has
run out of recording paper. Try again.
—————————————————————
REMOVE DOCUMENT
L The document is jammed. Remove the
jammed document (page 72).
L Press {STOP} to eject the jammed
document.
—————————————————————
SERIAL ERROR
L There is something wrong with the unit and
the base unit will not work. Contact our
service personnel.
—————————————————————
SYSTEM IS BUSY
L The system is busy. Replace the handset or
stop using monitor, then try again.
—————————————————————
TRANSMIT ERROR
L A transmission error occurred. Try again.
—————————————————————
UNIT OVERHEATED
L The unit is too hot. Stop using the unit for a
while and let the unit cool down.
12. Help
65
Advertisement
Table of Contents
