Table of Contents
Advertisement
9. Programmable Features
turned OFF, the received document will be
slightly longer than the original document.
Code #39: Changing the display contrast
LCD CONTRAST
=NORMAL
[±]
"NORMAL" (default): For normal contrast.
"DARKER": Used when the display contrast is too
light.
Code #41: Changing the fax activation code
FAX ACTIVATION
=ON
[±]
If you wish to use an extension telephone (page
40) to receive faxes, activate this feature and
program the activation code.
1. Press {MENU}.
2. Press {#}, then {4}{1}.
3. Press {A} or {B} repeatedly to select "ON".
4. Press {SET}.
5. Enter your code (2 to 4 digits) using the dial
keys {0}–{9}, {*} and {#}.
L The default code is "@#9".
L Do not enter "0000".
6. Press {SET}.
7. Press {MENU}.
Code #44: Setting the memory reception alert
RECEIVE ALERT
=ON
[±]
To alert you with a beeping sound when a
received fax document is stored into memory
due to some existing problem.
The slow beeps will continue until you clear the
printing problem and make sure the unit is
supplied with enough paper to print the stored
document.
"ON" (default): You will be alerted to a reception
problem by a beeping sound.
"OFF": Deactivates this feature.
Code #46: Setting friendly reception
FRIENDLY RCV
=ON
[±]
To receive a fax automatically when you answer
a call and hear a fax calling tone (slow beep).
"ON" (default): You do not have to press
{FAX/START} for fax reception.
"OFF": You have to press {FAX/START} for fax
reception.
54
Code #54: Changing the recording time for
your TAM/FAX greeting message
GREETING TIME
=16s
[±]
"16s" (default): Maximum recording time is 16
seconds.
"60s": Maximum recording time is 60 seconds.
See page 46 for details.
Code #55: Setting the greeting message
TAM GREETING
RECORD
[±]
See page 46 for details.
Code #58: Setting the scan contrast
SCAN CONTRAST
=NORMAL
[±]
To send or copy a document with faint or dark
writing, set this feature before starting
transmission or copying.
"NORMAL" (default): Used for normal writing.
"LIGHT": Used for dark writing.
"DARKER": Used for faint writing.
L This feature is not valid if you select "PHOTO"
resolution for sending (page 34) or copying
(page 45) a document.
Code #59: Setting the print contrast
PRINT CONTRAST
=NORMAL
[±]
To adjust the darkness of received or copied
documents.
"NORMAL" (default): Normal contrast.
"DARKER": Darker contrast.
Code #67: Setting the greeting message
monitor
GREET MONITOR
=ON
[±]
To select whether the greeting message is heard
through the unit's speaker when the unit answers
a call.
"ON" (default): You can monitor the greeting
message.
"OFF": Only the caller message will be heard
through the speaker.
Code #70: Calling your pager
PAGER CALL
=OFF
[±]
See page 50 for details.
Advertisement
Table of Contents
