Table of Contents
Advertisement
5. Fax
L The document will be fed into the unit and
scanned into memory. The unit will then
send the data to each party, calling each
number sequentially.
L After transmission, the stored document
will be erased from memory
automatically, and the unit will
automatically print a report (Broadcast
sending report).
Note:
L If you select "FINE", "SUPER FINE" or
"PHOTO" resolution, the number of pages
that the unit can send will decrease.
L If the document exceeds the memory
capacity, sending will be canceled.
L If a party is busy or does not answer, it will be
skipped and redialed later up to 5 times.
To send the same document to a one-time
group of parties
You can also select a one-time group of parties
to send the same document to. After
transmission, this group will be deleted.
1. Insert the document.
2. Press {>}.
3. Press {A} or {B} repeatedly to display "ONE
TIME BROAD".
4. Press {SET} to start programming the
parties you want to send the document to.
5. Program items.
Using stations 2–5:
Press the desired station key.
Using stations 6–10:
Press {LOWER}, then press the desired
station key.
Using base unit phonebook:
Press {A} or {B} repeatedly to display the
desired item and press {SET}.
L To program other items, repeat this step
(up to 20 items).
L If you program the wrong item, press
{STOP} to erase the item.
6. Press {FAX/START} to start transmission to
the programmed parties.
To cancel broadcast transmission
1. Press {STOP} repeatedly until "SEND
CANCELLED?" is displayed.
2. Press {SET}.
38
Note:
L You can confirm the canceled recipients on
the Broadcast reports that will be printed
after the cancelation is completed.
Advertisement
Table of Contents
