InFocus LitePro 610 Quick Start Manual page 49

Pull the handle out to remove the module.
•
5 Fit the new lamp module in place (Figure 38).
Align the module in the correct direction (with the screw
•
fastener at the top).
Gently push the module in as far as it goes.
•
Tighten the screw fastener.
•
Downloaded from ProjectorsManual.com Manuals
F 37
IGURE
Removing the lamp module
F 38
IGURE
Installing a new lamp module
WARNING: Do not drop the
lamp module or touch the glass
bulb! The glass can shatter and
cause injury.
43