InFocus LitePro 610 Quick Start Manual page 46

U s i n g
NOTE: Do not select "Off" if
your monitor is connected directly
to the CableWizard.
40
Downloaded from ProjectorsManual.com Manuals
t h e P r o
Rear Projection
When you select Rear Projection, the projector reverses the image
so you can project from behind a translucent screen.
Click either mouse button to reverse the image for rear projec-
•
tion.
Monitor Connect
When Auto is selected, the projector attempts to pick the correct
monitor connection based on the input signal it receives. This set-
ting produces the best results in most situations. Select "On" or
"Off" only if the image is very dim or not projected.
Select "On" if your monitor is connected directly to the
•
CableWizard and the images are excessively dim.
Select "Off" if your monitor is not connected directly to the
•
CableWizard and the image is not projected. (Some IBM
ThinkPad computers exhibit this problem, especially the
ThinkPad 760.)
j e c t o r