InFocus LitePro 610 Quick Start Manual page 37

2 Press the right disk mouse button to display the color selector.
Position the cursor on the desired color, then press the left
mouse button. Press the right button again to close the color
selector.
3 Move the pencil to where you want to start the annotation.
4 Press the left mouse button on the disk mouse. The cursor
changes to an upright pencil.
5 Use the disk mouse to draw your annotation. Press the left
mouse button to finish the annotation.
6 To exit Scribble, press the
automatically deleted (it cannot be saved).
Standby
When you press
standby
screen becomes black. After 15 seconds the lamp goes out if you
haven't pressed any other buttons.
If you press
•
standby
returns to normal operations immediately.
If you press
•
standby
up to a 30-second delay before the lamp turns back on.
Video
When you have more than one source (computer or video) con-
nected to the projector, you select between them by pressing the
button for the source you want.
Press to display the image from your video player.
video
Volume
To increase the volume, press
•
To decrease the volume, press
•
The buttons are auto-repeating; they continue to adjust
volume
the volume as long as you hold them down. Volume adjustments
are saved for each source you have connected.
Downloaded from ProjectorsManual.com Manuals
button. The annotation is
scribble
, the display and audio turn off and the
again within 15 seconds, the projector
again after the lamp goes out, there can be
31