Makita 2106 Instruction Manual page 9

Hold the tool
as
shown in the figure with
the stopper plate contacting the workpiece
and the blade clear of the workpiece.
Turn the tool on and wait until the blade attains full speed. Gently lower the blade into
the cut. The weight of the tool or slightly pressing the tool down will supply adequate
pressure for the cutting.
Do
not force the tool.
As you reach the end of a cut, release pressure and, without actually raising the tool, lift
it slightly so that it will not fall against the workpiece.
CAUTION
:
0
Applying excessive pressure to the tool or twisting of the blade may cause bevel cutting
0
When not using the tool for
a
long period
of
time, remove the blade from the tool.
or damage to the blade.
9