Figure 4.38 Removing The Lcd Bezel Assembly From The Low-End Model - Toshiba Satellite A500D Series Maintenance Manual

4 Replacement Procedures Error! Style not defined. Error! Style not defined.
4.21 LCD Bezel Assembly
Removing the LCD Bezel Assembly
The LCD comes in two different models: a high-end assembly model and a low-end assembly
model. Remove the LCD bezel assembly of each model according to the following procedures.
For Low-end Model
1. Remove four screw rubbers on the LCD bezel. Remove four M2.5x6 screws as shown in
Figure 4.38.
M2.5x6*4

Figure 4.38 Removing the LCD Bezel Assembly from the low-end model

Satellite A500D Maintenance Manual 4-46