Toshiba NB300 Maintenance Manual page 193

4 Replacement Procedures
6. Remove the tape and LVDS cable connector. Then detach the LVDS cable.
NOTE:
Integrated Circuits (ICs) are fragile. Use extreme care not to apply pressure to the ICs along
the edges of the LCD module.
Dispose of used LCD panels (fluorescent (FL) tubes) as required by local ordinances or
regulations.
The LVDS cable must be carefully peeled away before disconnecting it from the LCD panel.
NB300 Maintenance Manual
Error! Style not defined. Error! Style not defined.
Figure 4.54 Removing the LVDS cable
4-54