Trap Commands - D-Link DES-2110 User Manual

Example usage:
To display port mirroring configuration:

Trap Commands

The trap mirroring commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the following
table.
Command
config discovery
trap_ip
config discovery
trap_event
delete discovery
trap_event
show discovery trap
Figure 77. show mirror command
Parameters
ipaddress
<vlan_id>}
{[bootup | illegal_login | t_rx_err |
t_tx_err|
f_link_change]}
{[bootup | illegal_login | t_rx_err |
t_tx_err|
f_link_change]}
82
<ip_address>
f_rx_err |
f_rx_err |
{vid
f_tx_err|
f_tx_err|