Basic Switch Commands - D-Link DES-2110 User Manual

Basic Switch Commands

The basic switch commands in the Command Line Interface (CLI) are
listed (along with the appropriate parameters) in the following table.
Command
show switch
config system
config system_name
config location_name
reset
logout
save
Each command is listed, in detail, in the following sections.
show switch
Purpose
Syntax
Description
Parameters
Parameters
auto_logout <value 3 ~ 30>
{<system_name >}
{<location_name>}
<config>
Used to display general information about the
Switch.
show switch
This command displays information about the
Switch.
None.
60