Maytag MES8880DS User Manual page 6

KEYPAD FEATURE
BROIL Broiling
CONVECT Convection
cooking
KEEP WARM Hold warm
WARM ZONE Warming zone
ON/OFF/
CONFIRM
DELAY Delayed start
START
COOK TIME Timed cooking
POWER Rapid oven
PREHEAT preheating
WARMING Warming drawer
DRAWER ON
(HI/MED/LO)/
OFF
AQUALIFT Clean cycle
SELF CLEAN
INSTRUCTIONS
1. Press BROIL.
2. Select the broiling temperature by pressing 1 - High or 2 - Low.
3. Press START and allow the oven to preheat for 2 minutes.
4. To change the temperature, repeat steps 2 and 3.
5. Position the cookware in the oven, and then close the door.
6. Press CANCEL when finished.
1. Press CONVECT until the desired convection mode appears in the display.
2. Press START.
3. Press the number keypads to set the desired temperature.
4. Press START.
5. To change the temperature, repeat steps 3 and 4.
6. Press CANCEL when finished.
Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Set the desired temperature between 145°F and 190°F (63°C and 88°C) using the number
keypads. The default temperature is 170°F (75°C).
3. Press START.
4. To change the temperature, repeat steps 2 and 3.
5. Press CANCEL when finished.
Press WARM ZONE ON/OFF to select the warming element on the cooktop, and then press
WARM ZONE CONFIRM.
Press WARM ZONE ON/OFF again to turn off the warming element.
The Delay Start keypad is used to enter the starting time for an oven function with a delayed start.
Delay Start should not be used for foods such as breads and cakes because they may not bake
properly.
To set a Timed Cook or a Delayed Timed Cook, see "Cook Time" section.
Timed cooking allows the oven to be set to turn on at a certain time of day, cook for a set length of
time, and/or shut off automatically.
To set a Timed Cook or a Delayed Timed Cook, see "Cook Time" section.
Provides the fastest preheat time for the Bake function. Power Preheat is preset to Off, but it can
be changed to On.
1. Press POWER PREHEAT.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
IMPORTANT: This feature should only be used for one-rack baking. Unused racks should be
removed prior to Power Preheat. A standard rack should be used for Power Preheat.
If preheating for the Bake cycle has already started, Power Preheat may be started directly by
pressing POWER PREHEAT.
1. Press WARMING DRAWER ON to select the Warming Drawer function at the Low setting.
2. To select a higher temperature setting, press WARMING DRAWER ON a second time for the
Medium setting or a third time for the High setting.
3. Press START to begin preheating the warming drawer.
4. Allow the warming drawer to preheat for 15 minutes.
5. Place the cooked food(s) in the warming drawer.
6. Press WARMING DRAWER OFF to turn off the heating element.
See the "Warming Drawer" section for more information.
See the "Clean Cycle" section.
6