Advertisement
Reversing switch action
This tool has a reversing switch to change the
direction of rotation. Slide the reversing
switch to the right for clockwise rotation or to
the left for counterclockwise.
Reversing switch
-
CAUTION:
0
Always check the direction of rotation before operation.
0
Use the reversing switch only when the tool comes to a complete stop. Changing the
Overload protector
The overload protector automatically cuts out to break the circuit whenever heavy work is
prolonged. Wait 20-30 seconds before resuming operation.
direction of rotation before the
tool
stops may ruin the tool.
Holding tool
Hold the tool as shown in the figure.
When drilling a large diameter hole, hold the
tool firmly with both hands.
a
Advertisement
